The tank compressor is used to unload fluids from a pressure truck in situations where pumps cannot be used due to the aggressive and/or corrosive characteristics of the cargo. The piping of the compressor, for example, consists of stainless steel.
Products suitable for tank compressors include: fluid animal feed, food, chemicals, bitumen or heavy fuel oil.
If a fluid compressor is combined with HyDrive, the installation is suitable for both compressor and product pump drive. These can be activated simultaneously as well as independently.
The HyDrive/Booster has a large cooling capacity, yet requires little room. The HyDrive can also be finished with a full plastic hood, keeping external pollution to a minimum.
The tank compressor can be equipped with:
| Type | Alfons Haar Vmax1 |
|---|---|
| System | Vane |
| Flow rate (m3/h) at 1.5 bar | 90-165 |
| Flow rate (m3/h) at 2 bar | 85-150 |
| Flow rate (m3/h) at 2.5 bar | 75-135 |
| Possible discharge rate (I/min) at 2 bar | 850 |
| Speed range (rpm) | 1000-1600 |
| Suction conditions | 1 bar-20 °C |
| Maximum pressure | 2,5 bar |
| Power at coupling at 2 bar | 6,5-10 kW |
| Minimum mounting space | 65 cm |
| Soundlevel installation | 84 dBA |
| Type | CVS RKL 160 |
|---|---|
| System | Vane |
| Flow rate (m3/h) at 1.5 bar | 200-133 |
| Flow rate (m3/h) at 2 bar | 92-123 |
| Flow rate (m3/h) at 2.5 bar | 83-111 |
| Speed range (rpm) | 1200-1600 |
| Suction conditions | 1 bar-20 °C |
| Maximum pressure | 2,5 bar |
| Power at coupling at 2 bar | 6,5-8,6 kW |
| Minimum mounting space | not applicable |
| Soundlevel installation | 84 dBA |
| Dimensions installation | not applicable |
| Type | GHH SV200 |
|---|---|
| System | Vane |
| Flow rate (m3/h) at 1.5 bar | 75-163 |
| Flow rate (m3/h) at 2 bar | 65-152 |
| Flow rate (m3/h) at 2.5 bar | 55-140 |
| Speed range (rpm) | 1000-1800 |
| Suction conditions | 1 bar-20 °C |
| Maximum pressure | 2,5 bar |
| Power at coupling at 2 bar | 6,0-11,3 kW |
| Minimum mounting space | not applicable |
| Soundlevel installation | 84 dBA |
| Dimensions installation | not applicable |
| Type | Blackmer B600 20R |
|---|---|
| System | Screw |
| Flow rate (m3/h) at 1.5 bar | 270-540 |
| Flow rate (m3/h) at 2 bar | 250-520 |
| Flow rate (m3/h) at 2.5 bar | 360-500 |
| Speed range (rpm) | 1200-2000 |
| Suction conditions | 1 bar-20 °C |
| Maximum pressure | 2,5 bar |
| Power at coupling | 17-35 kW |
| Minimum mounting space | not applicable |
| Soundlevel installation | 90 dBA |
| Dimensions installation | not applicable |
